HOTOTECH
+8613553813526
Products
Current Location:Home > Respiratory mask testing machine > HT-8010 Protective mask comprehensive testing machine ( leakage, dead space, Protective effect)
Split case pump
ProductTitle: HT-8010 Protective mask comprehensive testing machine ( leakage, dead space, Protective effect)
ProductModel: HT-8010
Category: 86 *
Email: hongtu@lab-tester.com
CompanyName: HOTOTECH
Phone: +8613553813526
Fax: +86076987889150
Characteristic: HT-8010 Protective mask comprehensive testing machine ( leakage, dead space, Protective effect)

HT-8010 Protective mask comprehensive testing machine ( leakage, dead space, Protective effect)

Testing standard

Conform GB2626GB32610 testing standard requirement

 

The mainly specifications

1NaCl produce air volumemore than 100L/min

2NaCl Particle concentration10±2mg/m³

3NaCl particle air dynamicsParticle size distribution:0.022umMass median diameter about:0.6um

4Oil particle produce air volumemore than 100L/min

5Oil particle concentration2030mg/m³

6Oil fog air dynamics : particle size distribution:0.022umMass median diameter about:0.3um

7Particle detector dynamic range0.001200mg/m³Accurate: 1%;Response time not more than:500ms

8Sampling pump0.504L/min

9Flow12L/min

10Included particle concentration monitor

11Included testing house

12Particle generating device

12.1Aerosol output volume flow:1-2.5m³/h

12.2Aerosol produce the speed rate0.5-2×1013P/h

12.3Atomization pressure≥10Kpa-80Kpaadjustable

12.4Particle size distribution of aerosols0.02-2um

12.5Aerosol type:DEHS cold polydispersityPAO/DOP cold polydispersity

12.6SizeHeight 200×Width 250×Length 370mm

12.7The weight3KG

12.8Compressor air source less than 0.7Mpaclear and stability supplier air

13Particle concentration sensorAmerican TSI):

13.190 degree light scattering

13.2Concentration range0.001~150mg/m³

13.3Resolutionreading value 0.1% or 0.001mg/m³The larger of the two

13.4Return to zero stability10 second time constant24 hours±0.001mg/m³

13.5Particle size range0.1~10um

13.6Flow3.0L/min ,out factory set up 1.4~3.0L/min (can adjustable)

13.7Temperature coefficients:approx+0.001mg/m³/℃It’s relative to last time adjust zero temperature deviation

13.8Operate temperature0~50℃

13.9Storage temperature-20~60℃

13.10Operate temperature0~95%RHnon-condensing

13.11Time constant1~60sadjustable

13.12Data acquisitionData point5MB>60000个)(Once a minute for 45 daysAcquisition

Interval1s to 1 hours ( adjustable )

13.13Communicate interfaceUSB

13.14Outer dimension125×121×316mm

13.15Weight1.3kg(Net weight,1.5kg(included 1 battery

13.16PowerAC adapter (standard) or rechargeable battery

13.17Alarm output: buzzer

13.18Display screen3.5inVGA color touch screen

14 Protective effect suction gas sampling tube is at the lower end of nostril (in mouth)

15Protective effect use breathing simulator, simulate people’s breathing state

16Breathing simulator

16.1Sinusoidal flowfrequency :20/min

16.2Breathing flow control:30±1L/min

16.3Respirator flow range0-40   L/min

16.4Tester accurate levelClass 1

17HT-8010 specified operate software control testing testing action

18HOTOTECH research and development control board card

19Real-time display leakage rate

20Automatic calculation leakage rate

21Software with Chinese and English language , can change each other

22Software support data storage, history information checking, data export / print etc

23Report can save to WordExcelPDFJPG etc format

24Included a computer

 

Company name:
Name:
Tel:
E-mail:
MsgContent:
Verify code:

Note: Please fill in your contact information is correct, you consult the content we will email to reply you! Thank you for your support!

Copyright © HOTOTECH GoogleSitemap