HOTOTECH
+8613553813526
Products
Current Location:Home > PV Module testing Machine > Robustness of terminations testing machine
Split case pump
ProductTitle: Robustness of terminations testing machine
ProductModel: HTPV-13
Category: 83 *
Email: hongtu@lab-tester.com
CompanyName: HOTOTECH
Phone: +8613553813526
Fax: +86076987889150
Characteristic: Robustness of terminations testing machine(have three function:Retention of junction box on mounting surface, cord anchorage pull testing, cord anchorage torque testing)

Model: HTPV-13
Name: Robustness of terminations testing machine(have three function:Retention of junction box on mounting surface, cord anchorage pull testing, cord anchorage torque testing)
Standard
It's conform IEC61215-2:2016 testing standard
Purpose
It's to determine that the terminations, the attachment of the terminations, and the
attachment of the cables to the body of the module will withstand stresses that are likely
to be applied during normal assembly or handling operations, test in 4.14.2 (MQT14.1)
and test in 4.14.3 (MQT 14.2) are to be performed
.
Retention of junction box on mounting surface
a.40N force apply to the centre point of junction box , prevent torque apply on the junction box
b. Remain time:10+1s
C. Apply ways:weights
d. Timing ways: Stopwatch
Cord anchorage pull testing
a.Use motor offer the drive power
b.The mass of weights:30N, 42N,55N,70N,80N,90N,100N,115N
c.Pull cycle:1s
d.Times :54 times (can set)
e.Displacement :Manual measurement

Cord Anchorage torque testing
Specifications
a.Apply force device :servo motor
c.Test time:1min (can set)
d.Automatic show the torsion

Company name:
Name:
Tel:
E-mail:
MsgContent:
Verify code:

Note: Please fill in your contact information is correct, you consult the content we will email to reply you! Thank you for your support!

Copyright © HOTOTECH GoogleSitemap