Current Location:Home > PV Module testing Machine > Mechanical Load Tester
Split case pump
ProductTitle: Mechanical Load Tester
ProductModel: HTPV-08
Category: 83 *
CompanyName: HOTOTECH
Phone: +8613553813526
Fax: +86076987889150
Characteristic: Mechanical Load tester/Stand is to determine the ability of the module to withstand wind , snow , static or ice loads;Mechanical Load Test Stand;Solar pv test equipment;High-low temperature test chamber

Mechanical load tester
 for simulating static and dynamic loads on modules and collectors. Twenty-four cylinders with vacuum chucks apply compressive and tensile loads on the test sample while reducing local mechanical stress points, providing a high degree of ease of operation and flexibility. It simulates both static and dynamic loads and is suitable for load testing of typical size modules according to international standards. The 24 cylinders with vacuum chucks applied compressive and tensile loads on the test specimen.

The mechanical load tester is the ideal test solution for photovoltaic and solar panel test projects. We can provide individual customization, and we want to know more about y and our professional sales team to get more information about PV test solutions and systems. We offer the perfect solution for the solar energy new energy industry.YouTube Video

Model: HTPV-08

Name:Mechanical Load Tester

Standard:According to IEC 61215, UL1703, IEC62782 standard requirement

This test is to determine the ability of the module to withstand wind , snow , static or ice loads

Technical specifications:
1.The machine table appearance dimension:L 280 × D 180 × H 195 cm(Adjust according to test sample size)
2.Test Positive load 5400Pa, reverse load :2400Pa (Pressure can setting)
3.Cycle times :free setting
4.Dynamic load test frequency:7s±3s
5.Dynamic load:1000Pa,1000tims
6.Pressure control accurate:5%
7.Pneumatic and force value feedback ways :low friction force cylinder,tensile pressure
sensor(accurate 0.1N)
8.Aluminum profile structure, platform and support frame under the suffer force situation, its not deformation (aluminum profile surface use electrophoresis to ensure no discoloration)
9.The maximum test dimension:2000mm×1000mm (can according to customer’s requirement to customized)
10.Customization test platform fixture, according to determinand install ways to do the adjust
11.Current continuity system :DC power, DC 120V/20A, real-time monitor module inner current continuity
12.Cylinder: 4 groups , in total 8 pieces
   Single the maximum output > 200 kg
   Telescopic stroke:150mm
13.Sucker:8 groups , in total 32 pieces
   Sucker diameter:120mm
   Sucker(with cylinder) space horizontal and vertical≤200mm
   Sucker with upper connection joint can rotation angle≥15°
14.Operate system maturity and humanization
a.Computer control software research and development by HOTOTECH , easy operate and humanization
b.Every version software all equipped with unique version number, easy to Identification and upgrade
c.Software with Chinese and English language , can change each other
d.With real-time show pressure, deformation, test time, cycle times , current continuity etc function
e.Input target pressure value, test running after, the machine can automatic adjustable pressure
to target pressure value stability
f.Selected data save after, real-time test data and save
g.At the calibration window input the password and enter into the calibration backstage, fast
calibration machine and modify parameter set
h.Real-time draw real-time show pressure and deformation value
i.Real-time show every cylinder force value and draw force value curve
j.Enter into the history information and inquiry interface then input sample number research can inquiry this number history data report and print out
k.Report support output World, Excel, PDF , JPG etc format
l.Software with fault warning function, when machine happen above any situation after, software will popup prompt window, machine will warning and prompt operator do the relative treatment


Company name:
Verify code:

Note: Please fill in your contact information is correct, you consult the content we will email to reply you! Thank you for your support!

Copyright © HOTOTECH GoogleSitemap